Installation; Unpacking; Wall Installation - Bosch LE10 User Manual

LE10 Radio Receiver
3

Installation

3.1

Unpacking

The LE10 Radio Receiver is carefully packed for transportation.
The components contained in the box are protected, but should
be handled with care. Store the packaging material for further
use (storage or transport). In case of defective or missing
equipment, do not try to install the LE10 Radio Receiver.
Contact immediately your local representative.
1. Take all components out of the box and place the LE10 Radio
Receiver on the working space.
2. Check that the following accessories are delivered: the
fixings (2 screws and 2 screw anchors) and this user manual.
3. Check that the LE10 Radio Receiver and its accessories have
not been damaged during transportation.
3.2

Wall installation

You can fasten the LE10 Radio Receiver on a smooth wall
surface using two screws. Installation cables should be placed
inside the cable channels on the bottom of the LE10 Radio
Receiver.
Figure 3.1 Dimensions of the backside of the LE10 Radio Receiver
Bosch Security Systems
13.1
131
User Manual
8 0
53.8
3.7
6.6
F.01U.139.675 | V1.3 | 2013.05
Installation | en 35
16
27
59.9