Table of Contents
Advertisement
RT-XLAN User Manual
2. With the other hand, lift the black tab on the side of the base to firmly break the
seal then carefully pull the device away from the vehicle
Note: Care should be exercised when removing the device, there may still be a
strong vacuum seal holding it to the surface
The plastic protection plate should be retained and replaced on the cup when not in use
to protect the surface from damage.
Figure 2. Attaching and removing the pump cup
NOTE: When removing the pump cup from the vehicle, please take extra care to fully break the seal on
the base using the tab before attempting to pull the device away.
A number of mounting options are available, some of which are shown in Figure 3.
Figure 3. Mounting options
The pole for the antenna can be fixed either vertically or horizontally to the base and can be adjusted to
suit the vehicle and environment. By adjusting the mounting location and antenna angle it may be
possible to improve the signal strength of the vehicle to vehicle communication.
Revision: 140611
9
Advertisement
Table of Contents
