Wiring - OXTS RT-XLAN User Manual

Wiring

Wiring of the RT-XLAN to the RT-Range S system could not be easier. Simply
connect the 110-00274-301 PoE Ethernet to M12 cable from the RT-XLAN to the
dedicated socket on the front of the RT-Range S as shown in Figure 4. This dedicated
socket powers up the RT-XLAN as well as handling the Ethernet link.
Figure 4. Wiring connections to the RT-Range S system
Note: Connections to the standard RT-Range system are described on page 13 of this manual
Although the RT-XLAN is weather resistant, we strongly recommend that the N-Type
connector from the device to the antenna is covered with self-amalgamating tape to
help protect it from moisture.
When using the RT-XLAN with a standard RT-Range system or standalone with just
the RT, it will be necessary to use the Y cable converter kit (ordered separately). More
information about this can be found on page 13 of this manual.
10 Oxford Technical Solutions