Using The Rt-Xlan With A Standard Rt-Range System Or Direct To Rt; Connections - OXTS RT-XLAN User Manual

RT-XLAN User Manual

Using the RT-XLAN with a standard RT-Range system or direct to RT

Connections

If the RT-XLAN is to be used with the standard RT-Range Hunter or Target system, or
in a target vehicle without the RT-Range Target, then it will be necessary to supply
power and Ethernet to the RT-XLAN via the Y cable converter kit (ordered separately).
The kit contains two cables-14C0147A (Y cable) and 14C0149A (cigar plug adapter).
Drawings of these cables are shown in Figure 5 and Figure 6.
To use the Y converter cable with the RT-XLAN it must first be coupled to the 110-
00274-301 PoE Ethernet to M12 cable (supplied with the RT-XLAN) to complete the
solution.
Do not be tempted to extend the Ethernet cable to the RT-XLAN as this may result in
damage if the connections are crossed over.
Figure 5. Y cable drawing 14C0147A
Figure 6. Cigar plug to M12 4 Pole Male pin 14C0149A
Revision: 140611
13