Vehicle Wiring Options Using The Rt-Xlan Y Cable Converter Kit - OXTS RT-XLAN User Manual

For alternative cabling solutions, the pin connections for the 14C0147A and 14C0149A
cables are given in Table 4 and Table 5.
Table 4. PoE cable connections 14C0147A
Signal Name
Tx+ Green/White
Tx- Green
Rx+ Orange/White
Supply Brown & White
Rx+ Orange
Supply Return Blue & Black
Table 5. Cigar plug to M12 4 Pole Male pin 14C0149A
Signal Name
Supply
Supply
Supply Return
Supply Return

Vehicle wiring options using the RT-XLAN Y cable converter kit

To use the RT-XLAN with standard RT-Range systems, connect the (J2) RJ45 plug on
the Y cable to a spare Ethernet socket located on the front of the RT-Range hunter or
target unit and the (J3) M12 plug of the Y cable to the spare power output of the RT-
Range hunter or target unit as shown in Figure 7.
It is also possible to use just the RT-XLAN connected directly to the RT and
completely avoid using the RT-Range target unit where no other connectivity is
required in the target vehicle. To do this, connect the cigar plug cable (14C0149A) to
the (J3) M12 plug of the Y cable then connect the cigar plug to the power source.
Connect (J2) RJ45 plug of the Y cable to the Ethernet on the RT User Cable (J6) using
the cross-coupler supplied with the RT3000 & RT4000 or directly to the RT2002 as
shown in Figure 8.
14
Wire Colour
Wire Colour
Brown
White
Blue
Black
J1 J2
1 3
2 6
3 1
4 N/A
6 2
7 N/A
J1
1
2
3
4
Oxford Technical Solutions
J3
N/A
N/A
N/A
1 & 2
N/A
3 & 4
J2
Centre Core
Centre Core
Outer Contacts
Outer Contacts