Enabling Ptt Communication; Selecting A Talk Group; Ptt Communication; Figure 29: Ptt Express Window - Motorola MC40 User Manual

Table 8: PTT Express Default user Interface Descriptions

Item
Notification Icon
Service Indication
Talk Groups
Settings
Enable/Disable
Switch

Enabling PTT Communication

Procedure:
1 Touch
.
2
Touch .
3 Slide the Enable/Disable Switch to the ON position. The button changes to a blue ON button.

Figure 29: PTT Express Window

Selecting a Talk Group

One of 32 Talk Groups can be selected by PTT Express users. However, only one talk group may be enabled at a time
on the device. Touch one of the 32 Talk Groups. The selected Talk Group is highlighted.

PTT Communication

Note: This section describes the default PTT Express client configuration. See the PTT Express V1.2 User
Guide for detailed information on using the client.
PTT communication may be established as a Group Call or Private Response. When PTT Express is enabled, the
buttons on the left side of the device are assigned for PTT communication. When the Wired Headset is used, Group
Calls and Private Responses can also be initiated using the headset Talk button.
Description
Indicates the current state of the PTT Express client.
Indicates the status of the PTT Express client. Options: Service Enabled, Service Disabled
or Service Unavailable.
Lists all 32 Talk Groups available for PTT communication.
Opens the PTT Express Settings screen.
Turns the PTT service on and off.
Using the MC40 | 49
MN000111A02-A | April 2014 | Send Feedback