Center Zipper - Husqvarna Viking Platinum 755 User Manual

Sewing

Center Zipper

Fabric: Woven medium
715 / 735 755
1:02
Sew the two fabrics together along a 5/8''
(15 mm) seam line up to the notch at the
zipper placement.
715 / 735 755
1:07
Baste the zipper area of the seam together.
Press the seam open. Place the zipper right
side to the pressed open seam allowance.
715 / 735 755
1:05 1:08
Remove the presser foot. Set stitch width to
6 mm, to bartack baste zipper in place. Set
the presser foot pressure to 2. Lower the
feed teeth by turning the dial on the free
arm to . Move the fabric to stitch a
series of bartacks over the zipper to hold it
in place.
Turn the feed teeth dial to sewing position
and the feed teeth will come up auto-
matically when you start sewing.
Sew:
• On Platinum 715/735 select straight
stitch and adjust stitch width to 6.0 for
left needle position straight stitch.
On Platinum 755, select stitch 1:01.
• Set your Platinum according to the
instructions on the InfoDisplay.
• There are two bars on the foot so you
can snap on the foot to the right or left
of the needle. Snap on Zipper Foot E to
the right of the needle.
42