Unpack Your Sewing Machine; Connect To The Power Supply - Husqvarna Viking Platinum 755 User Manual

Learn your Platinum

Unpack your sewing machine

1 Place the machine on a table or cabinet,
remove the packaging and lift off the
cover.
2 Remove the packing material, the foot
control and nally the protection cover.
3 The machine is delivered with an acces-
sory bag and a main cord.
4 Wipe off the machine, particularly
around the needle and needle plate to
remove any soil before sewing.

Connect to the Power Supply

Among the accessories you will nd
the main cord. On the underside of the
machine you will nd information about
the power supply (V) and the frequency
(Hz).
Before plugging in the foot control, check to ensure
that it is of type "FR4" (see underside of foot
control).
1 Take out the cord from the foot con-
trol. Connect the foot control cord to
the front socket on the bottom right
side of the machine.
2 Connect the power cord to the rear
socket on the bottom right side of the
machine.
3 When you press the power switch to
ON, both the machine and the light are
switched on.
For the USA and Canada
This sewing machine has a polarized plug (one
blade wider than the other). To reduce the risk
of electric shock, this plug is intended to t in a
polarized outlet only one way. If the plug does
not t fully in the outlet, reverse the plug. If it
still does not t, contact a quali ed electrician to
install the proper outlet. Do not modify the plug
in any way.
4
3 1 2