Standby - Miele T 7644 C Operating Instructions Manual

Programmable functions

Standby

To save energy, the display and the
programme sequence/check lights
go out after 10 minutes and the
Start/Stop button starts flashing
slowly.
To come out of standby mode
^ Turn the programme selector or
press a button. Neither will have any
effect if a programme is running.
Factory default
The standby function is activated and
the display and programme sequen-
ce/check lights will go out after 10 mi-
nutes:
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
They will, however, come on for 10 mi-
nutes after a delay start time has coun-
ted down, at the end of the programme
or the end of the anti-crease phase.
The buzzer (if selected ) will sound for
10 minutes at the end of the program-
me.
52
Instead of the factory default setting
you can select another option:
Not in current programme
As described under "Factory default"
above.
However, the display and programme
sequence/check lights will stay on after
the programme has started and remain
visible during the programme.
Off
The display and programme sequen-
ce/check lights will stay on while the
dryer is switched on.
Follow the steps (A,B,C ...) to pro-
gramme and store in memory.
^ See next page.