Setting Speed Control; Disengaging Speed Control - Ford Lincoln Navigator Owner's Manual

Driver Controls

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.
1. Press the ON control and release
it.
2. Accelerate to the desired speed.
3. Press the SET + or SET - control
and release it.
4. Take your foot off the accelerator
pedal.
5. The indicator light on the
instrument cluster will turn on.
Note:
• Vehicle speed may vary momentarily when driving up and down a
steep hill.
• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

Disengaging speed control

To disengage the speed control:
• Depress the brake pedal.
Disengaging the speed control will not erase previous set speed.
102
2009 Navigator (nav)
Owners Guide, 1st Printing
USA (fus)