Trouble With The Activex Client; No User Interface In The Browser - COMPRO IP55 User Manual

Trouble with the ActiveX Client

Once you launch the Internet Explorer and enter the camera's IP address in the address field, you'll be asked
for the user name and password combination (the default is admin/admin, case sensitive).

No user interface in the browser:

This could be related to three possible causes.
1. ActiveX was not installed: Please install the ActiveX component by following the instruction on the
screen. This component must be installed. Otherwise you will not have access to the user interface.
2. ActiveX was installed but not enabled: Ensure that the ActiveX had been correctly registered with
your Internet Explorer. Please check that you've got both the "ComproClientActivex" and "USActiveX"
control components registered and enabled under Tools -> Manage Add-ons.
Note:
The ActiveX component developed by Compro
currently only runs on Microsoft Internet Explorer 6 or
greater. It does not function on other web browsers for
the time being.
Figure 9-3. ActiveX warning
Figure 9-4. ActiveX installation
Figure 9-5. ActiveX installation
Chapter 9: Troubleshooting
Trouble with the ActiveX Client 9-3