KT&C KM2115DKQCN User Manual page 82

Camera
 Choose a camera name between DVR and CMS setting or both.
- Device Camera Name: Display camera name of DVR.
- CMS Camera Name: Display Camera name of CMS.
- Both (Device-CMS) Camera Name: Display both as [DVR name]-[CMS name].
 If users mark the "Display to Server List", camera name is displayed in the server list.
 Type the name of each camera in "Camera Name" item.
 Users will be able to type not only in English but also in their own languages.
 It is possible to erase all names by clicking "Clear all names".
 Save and close the setting panel by clicking "OK".
 If users wish to exit without saving, then click "Cancel".
Scan Device
 This function automatically detects and registers units where currently connected to local network.
 Click "Scan Device", then following will pop up.
6.4.1.3 Edit Registered Site
 Select a site to adjust on local setup window and click "Edit"
 Change the setting then click "OK" to save and exit.
 Alternately, users can also edit the site by right clicking the mouse on the server name in the Server List.
6.4.1.4 Remove Registered Site
 Select a site to delete on local setup window and click "Remove"
 The site will be removed on the local setup window.
82