KT&C KM2115DKQCN User Manual page 50

- As for Domain Name, user has to input the Domain Name given from the selected DDNS Server.
- As for ID and Pass word, use the user ID and Password to log in to the selected DDNS Server.
- Click "Run ddns service" to start mapping from DVR to DDNS Server.
- Choose 'OK' to confirm the setting.
NOTE
User must join 'dyndns.org' or' no-ip.com' prior to using it as DDNS server. Please check corresponding website for more information.
Port
 Please click ( ) Port and the following screen will appear.
 Network Throat Control is for setting an average transfer speed.
 Please choose the suitable speed according to the users' network environment.
 If users want to use dual streaming, please click on the check box beside the "Enable Dual Streaming". If not, please
uncheck the check box.
 There are total of 14 different network throat controls users may choose. (bps: bit per second) 26 kbps, 128 kbps, 256 kbps,
512 kbps, 1 Mbps, 2 Mbps, 4 Mbps, 8 Mbps, 10 Mbps, 20 Mbps, 40 Mbps, 80 Mbps, 100 Mbps, Unlimited(default).
- Ethernet support Max. 1000Mbps.
 Network video transmission speed and quality can be configured by pressing "Frames" and "Quality" buttons as follows.
- Frames : 1, 2, 3, 4, 5, 7, 15, 30 frames for NTSC (1, 2, 3, 4, 5, 6, 12.5, 25 frames for PAL)
- Quality : Std. 1, Std. 2, Std. 3, Std. 4 (standard), High 1, High 2, High 3, Super 1, Super 2, Super 3
 The Port Number Setup menu will allow users to set Administrator and Port Number for Video/Audio and Web Port.
 The Port Number Setup menu has two selections of "Register UPNP" or "Unregister UPNP".
 Click ( ) "Register UPNP" for automatic port forwarding.
 Click ( ) "Unregister UPNP" to do port forwarding manually.
 For Port Number Setup, please get an approval of the network administrator in connection with CMS program.
 Port number
- Administrator: 5000~65535
- Video / Audio: 5000~65535
- Web: 1~65535
 Choose 'OK' to confirm the setting.
NOTE
"Enable Dual Streaming" and click "OK" button, DVR will automatically reboot.
If users check the
CAUTION
IT IS NOT POSSIBLE TO CHANGE PORT NUMBER DURING CMS ACCESS TO DVR.
CAUTION
CHANGES MADE IN SETUP WILL BE APPLIED AFTER EXITING THE MENU.
50