Fuel System - E-TON Sport 150 Service Manual

2. MAINTENANCE INFORMATION
Gear Oil
Inspection
Check gear oil if leaking.
Park the motorcycle with main stand on flat
level place.
Turn off engine and remove the gear oil
draining plug.
Place a measurement cup under the draining
hole.
Remove the oil drain plug and drain gear oil
into a measurement cup.
Check gear oil if enough.
Replacement
At first, remove the gear oil refilling bolt, and
then remove the draining plug.
Install the draining plug after drained oil out.
Torque value: 0.8~1.2 kgf-m
Caution
Inspect if washer is in good condition.
Replace it with new one if it was
deformed or damaged.
Fill out gear oil to specified quantity from the
engine oil filling hole.
Install the oil filling bolt.
Torque value: 0.8~1.2 kgf-m
Transmission oil capacity: 100 c.c.(90 c.c.
for change)
Recommended: SAE 85W-140.

Fuel System

Fuel Pipe
Remove luggage box, side cover, center
cover, body frame cover, and pedal, as well
as front inner box.
Check all pipes, and replace it when they are
deterioration, damage or leaking.
Warning
Gasoline is a low ignition material so
any kind of fire is strictly prohibited as
dealing it.
Fuel filter
Remove the side cover.
Remove fuel pipe from the fuel filter.
Replace the fuel filter with new one.
Install the fuel filter.
Caution
The arrow on the fuel filter means the
flow direction of fuel and check it if
leaking after installation.
2-4
Copyright ©2008-2009 ETON America, all rights reserved.
Fuel filter
E-TON
Gear oil refilling bolt
Gear oil draining plug