Periodical Maintenance Schedule - E-TON Sport 150 Service Manual

2. MAINTENANCE INFORMATION

PERIODICAL MAINTENANCE SCHEDULE

Mainte
nance Item
Code
1
Air cleaner
2 Fuel filter
3
Oil filter
4 Engine oil change
5 Tire pressure
6 Battery inspection
7 Brake & free play check
8 Steering handle check
9 Cushion operation check
10 Every screw tightening check
11 Gear oil check for leaking
12
Spark plug check or change
13 Gear oil change
14 Frame lubrication
15 Exhaust pipe
16 Ignition timing
17
Emission check in Idling
18 Throttle operation
19
Engine bolt tightening
20
CVT driving device (belt
21 CVT driving device (roller)
22 Lights/electrical equipment/mutli-meters
23 Main/side stands & springs
24 Fuel pipes
25 Cam chain
26
Valve clearance
27 Crankcase blow-by over-flow pipe
Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement C ~ Cleaning (replaced if necessary) L ~ Lubrication
Have your motorcycle checked, adjusted, and recorded maintenance data periodically by your E-TON Authorized Dealer to
maintain the motorcycle at the optimum condition
The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference which ever comes
first.
Remarks:
1. These marks " " in the schedule are emission control items. According to EPA regulations, these items
must be perform normally periodical maintenance following the use r manual instructions. They are
prohibited to be adjusted or repaired by unauthorized people. Otherwise, E-TON is no responsible for the
charge.
2. Clean or replace the air cleaner element more often when the motorcycle is operated on dusty roads or in the
Heavily- polluted environment.
3. Maintenance should be performed more often if the motorcycle is frequently operated in high speed and after the
motorcycle has accumulated a higher mileage.
4. Preventive maintenance
a. Ignition system - Perform maintenance and check when continuous abnormal ignition, misfire, after-burn,
overheating occur.
b. Carbon deposit removal - Remove carbon deposits in cylinder head, piston heads, exhaust system when power is
obvious lower than ever.
c. Replace worn out pistons, cylinder head.
2-2
Copyright ©2008-2009 ETON America, all rights reserved.
1 Month
Initial 300KM
Every1000KM
I
I
C
R
I I
I I
I I
I I
I I
I I
I I
I
R
I I
I I
A I
I
I
I I
I
I
I
I
I
3 month 6 month
Every3000KM Every6000KM
C C
I
C
Replacement for every 1000km
I R
Replacement for every 5000km
L
I
I
I
C
I
I
I
A
Replacement for every 2000km
E-TON
1 year
Every12000K
M
R
R
C
R