Fuel Tank Cap; Brake - E-TON Sport 150 Owner's Manual

FUEL TANK CAP

The fuel tank cap is behind the seat, near the rear carrier.
1. Insert the key into the fuel tank cap, and turn the fuel cap clockwise, then the cap can be
removed.
2. Do not fill above the fuel upper limit when refueling.
3. Align the " "mark on the cap with the " "mark on the fuel tank, then turn the fuel cap
anticlockwise and lock the fuel tank cap.
CAUTION:
Main stand should be put down on the ground, engine should be shut off and flames should be
strictly prohibited to ensure safety when refueling.
Do not fill above fuel upper limit when refueling. Otherwise, fuel will flow out through a hole on
the cap that may damage the body's painting, in serious cases; it may cause a fire to burn
down the motorcycle.
Make sure the cap has been

BRAKE

Avoid unnecessary sudden braking.
Use front and rear wheel brakes simultaneously when braking.
Avoid brake continuously for a long period of time because that may overheat the brakes and
reduce its braking efficiency.
Slow down and brake early when riding on rainy days and slippery roads. Never apply the
brakes suddenly. This prevents skidding and falling.
Using only the front brake or the rear brake increases the risk of falling because the motorcycle
tends to be pulled to one side.
Engine Brake
Return the throttle valve handle back to its original position, and apply engine brake.
It is necessary to apply brake both for front wheel and for rear wheel intermittently when riding on a
long or stiff slope.
Copyright ©2008-2009 ETON America, all rights reserved.
tightened properly.
For Rear Wheel For Front Wheel
10