Exhaust Muffler; Rear Wheel - E-TON Sport 150 Service Manual

E-TON

EXHAUST MUFFLER

Removal
Remove the front-end nut of the exhaust
muffler. (nuts x 2)
Remove the bolts. (bolts x 2)
Remove the exhaust muffler.
Installation
Install the exhaust muffler according to the
reverse procedure of removal.
Caution
Replace the exhaust muffler gasket if it is
broken or deformed.
Torque value:
Exhaust muffler connection bolt:
3.0~3.6kgf-m
Exhaust muffler connection nut:
1.0~1.4kgf-m

REAR WHEEL

Inspection
Measure wheel rim wobbling.
Service limit:
Radial: 2.0mm
Axial: 2.0mm
If the wheel rim wobbling out of the
specification, except resulted from the
wheel rim deformation, it might be loosen or
worn final driving shaft bearing or bend,
deformed driving shaft.
Removal
Remove the right cover. (screws x 4)
Remove the battery. (bolts x 2)
Remove the battery cover assembly. (bolts
x2, nuts x 2)
Remove the rear wheel. (wheel axle nut x1)
Copyright ©2008-2009 ETON America, all rights reserved.
15. REAR WHEEL/REAR SHOCK ABSORBER
Exhaust muffler
Nuts x 2
Bolts x 2
15-3