Fuel Unit - E-TON Sport 150 Service Manual

Hide thumbs Also See for Sport 150:
Table of Contents

Advertisement

E-TON

FUEL UNIT

Open the seat.
Remove the luggage box . (bolts x4).
Disconnect the fuel unit wire connector.
Caution
Do not damage or bend the float arm as
removing.
The resistance values are listed below when
the float arm in "F" and "E" positions.
Float arm position
E(empty)
F(full)
DOWN(empty)Connect the fuel unit to the
main harness.
Turn the main switch "ON" position.
Move the float arm in "UP" & "DOWN", and
then check if the fuel unit indication needle is
in correct position.
Caution
Turn on the turn signal light to make sure
battery is in good condition before this
test.
Float arm position
UP(full)
DOWN(empty)
Copyright ©2008-2009 ETON America, all rights reserved.
Resistance value
97.5~107.5
4~10
Indicator needle
E(empty)
F(full)
16. ELECTRICAL EQUIPMENT
UP
(full)
DOWN
(empty)
16-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents