Audio Streaming - Renkforce GI700BR Operating Instructions Manual

Caller ID display
• For an incoming phone call, the caller ID is shown in the display.

If the caller suppresses his caller ID or the mobile phone network does not support this feature, the caller
ID cannot be displayed.
Transmission of contact information / dialling from the phone book
• Touch the button
• Touch the button
• The phone book entries appear in the right half of the display.
• The phone book entries can be searched with the buttons

If, for example, the letter V is to be found, push the button "TUV 8" three times. The entries that start
with "V" are displayed.
Touch the button
• To select a phone book entry, touch it twice. The number is displayed.
• Touch the button
• To delete a phone book entry, select it and then touch the button

Audio streaming

Audio streaming is the transmission of audio data (music) by Bluetooth to the moniceiver.
If you have am A2DP-capable Bluetooth-device, you may connect it to the moniceiver by pairing as described above
and establish an audio transmission.
• Ensure that the two devices are connected by pairing.
• Start playback/auto transmission at your Bluetooth device (see corresponding operating instructions).
• Touch the button
• You may now remote-control playback of your Bluetooth device as usual with the buttons |
/ .
.
to download the phone book from the mobile phone.
to delete incorrect input.
to dial the number.
to switch to audio streaming operation.
or by touching the numbers/letters.
.
DEL
/ | and
81