Sharp VL-SW50U Service Manual page 30

VL-SWSOU
(2) Drum motor stator
Remove the stator mounting
Stator
screw with the hexagonal
wrench as shown in Figure
Phase matching hole
2, remove the motor stator.
Upper/lower drum ass'y
(3) Upper drum ass'y
Figure 2
\
Remove the upper drum ass'y from the lower drum ass'y as shown
At this time take care so as not to lose the gap shim.
I
Lower drum ass'y
\
I
in Figure 3.
Figure 3
Motor rotor ass'y and rotary transformer rotor ass'y
Remove the 2 rotor mounting screws as shown in Figure 4, and remove the motor rotor and the rotary transformer ass'y.
Rotor mounting screw
I
drum ass'v
Figure 4
5-16