Sharp VL-SW50U Service Manual page 13

VL-sw5ou
0 Disassembly of the LCD panel
I
I I I
Claw (A)
(-
Reflection sheet
Light guide plate
Diffusion sheet
Prism sheet
Diffusion sheet
1
Reflection Polarizing sheet
Lugs-
1 .
2 .
3 .
4.
Disengage two claws, and
remove the lamp unit (1)
from the LCD holder (2).
Remove the sheets from
the LCD holder (2).
Pull the LCD holding sheet
(3)
Disengage the claw (B) and
the LCD panel (4), remove
the LCD holder (2).
Note:
When handling the prism
sheet, reflection polarizing
sheet, diffusion sheet, light
guide plate, and reflection
sheet, do not touch any parts
other than lugs and sides.
Put the light guide plate and
reflection sheet between re-
flectors of lamp. Therefore,
install them together with the
lamp ass'y.
/
Claw (6)
Disengage the claw B, and remove the LCD panel.
(2)
(4)
4-5