Menu Items; Speed Beep; Instrument Panel Correctly - Alfa Romeo GIULIETTA Owner's Handbook Manual

MENU ITEMS

IMPORTANT With Uconnect™ 5"
radio system (for versions/markets
where provided), or Uconnect™ 6.5"
Radio Nav system (for versions/
markets, where provided), some Menu
items are displayed and managed
through the system and not through the
instrument panel (refer to the dedicated
supplements).
Menu
This item allows you to access the
Setup Menu.
Press the or button to
select the various Menu options. Hold
down the SET/ button to return
to the standard screen.
Lighting (Car interior
lighting adjustment)
(only with side lights on)
This function is used to set the
brightness of the instrument panel,
Uconnect™ system controls (for
versions/markets where provided) and
automatic climate control system
controls (for versions/markets where
provided) to 8 levels.
Proceed as follows to adjust the light
intensity:
❒ press button SET/
briefly. The
level set previously flashes on the
display;
❒ press button
or
the required brightness level;
❒ briefly press the SET/
button to
go back to the menu screen or hold
the button down to go back to the
standard screen without saving.
Note On versions with reconfigurable
multifunction display, adjustment can
be made both with lights off ("Daytime"
mode brightness level) and with lights
on ("Nighttime" mode brightness level).
Speed Beep (Speed
limit)
With this function it is possible to set
the car speed limit (km/h or mph); when
this limit is exceeded the driver is
alerted.
To set the desired speed limit, proceed
as follows:
❒ briefly press the SET/
button: the
display will show the wording "Speed
Beep";
❒ press button
or
speed limit activation ("On") or
deactivation ("Off");
❒ if the function is on, press
to select the desired speed
limit and then press SET/
confirm.
to set
IMPORTANT Setting is possible
between 30 and 200 km/h, or 20 and
125 mph, according to the previously
set unit. See the "Unit of Measurement"
paragraph described below. The
setting will increase/decrease by five
units each time button
pressed. Hold down the
button to automatically
increase/decrease the setting rapidly.
Complete the adjustment with single
presses of the button when you
approach the desired value.
Briefly press the SET/
back to the menu screen or hold the
button down to go back to the
standard screen without saving.
To cancel the setting, proceed as
follows:
❒ briefly press the SET/
"On" will flash in the display;
❒ press button
the display;
to select
❒ briefly press the SET/
go back to the menu screen or hold
the button down to go back to the
standard screen without saving.
or
to
/ is
/
button to go
button,
, "Off" will flash on
button to
87