Values Displayed; Indications On The Display - Alfa Romeo GIULIETTA Owner's Handbook Manual

❒ Average speed B
❒ Trip time B (driving time).
The "Trip B" function may be disabled
(see "Activating Trip B"). "Range" and
"Instant consumption" parameters
cannot be reset.

VALUES DISPLAYED

Range
This indicates the indicative distance
that may be travelled with the fuel in the
tank, assuming that driving conditions
do not change.
The display will show the reading '-----'
when the following events take place:
❒ range value lower than 50 km (or
30 mi)
❒ car parked with engine running for a
long period.
IMPORTANT The range can be affected
by several factors: driving style (see
"Driving style" paragraph in the
"Starting and driving" chapter), type of
route (motorway, towns and cities,
mountain roads, etc.), conditions of use
(load, tyre pressures, etc.). Trip
planning must therefore take the above
into account.
Distance covered
Shows the distance covered since the
start of the new journey.
Average consumption
Shows the approximate average fuel
consumption since the start of the new
journey.
Instantaneous consumption
This indicates the fuel consumption.
The value is constantly updated. The
display will show "- - - -" if the car
is parked with the engine running.
Average speed
This shows the average car speed as a
function of the overall time elapsed
since the start of the new journey.
Trip time
The time elapsed since the start of a
new journey.
INDICATIONS ON THE
DISPLAY
Each time a value is displayed, the
following information is shown:
❒ animated icon in the upper part fig.
103;
103
❒ the word "Trip" (or "Trip A" or "Trip B")
(B);
❒ the name, value and unit of
measurement of the selected
parameter (e.g. "Range 1500 km")
(C).
After a few seconds the name and
value of the selected parameter are
replaced by an icon fig. 104.
104
A0K2011
A0K0007
97