Page 2
The information in this publication is provided by way of example. Fiat Group Automobiles can modify the specifications of the vehicle model described in this publication at any time, for technical or marketing purposes. For further information, contact Alfa Romeo Authorized Services.
TIPS, CONTROLS AND GENERAL INFORMATION PTY function ............... 25 TIPS ................. AF function ..............26 GENERAL INFORMATION ..........REG function .............. 26 CONTROLS ..............10 Specific radio menu ............. 26 Steering wheel controls ..........15 CD - MP3 CD/SD FUNCTIONS MAIN FUNCTIONS ............
Page 5
Main navigation menu ..........34 TELEPHONE (only with Blue&Me system) Entering destination ............ 34 Telephone information display ........50 Stops management ............. 38 Specific telephone menu ..........51 Insert diversion ............38 Spot messages menu ..........52 Map options .............. 39 Navigation options .............
TIPS RECEPTION CONDITIONS CARE AND MAINTENANCE Reception conditions change constantly Observe the following precautions to ensure while driving. Reception may be interfered the system is fully operational: ROAD SAFETY with by the presence of mountains, build- ❍ the monitor is sensitive to scratching, liq- ings or bridges or when you are far from the Learn how to use the various system func- uid detergents and UV rays;...
Page 7
If there is a problem, the system should on- Dirt, scratches or any distortions on CDs riods; ly be checked and repaired at an Alfa Romeo could cause problems and poor sound qual- ❍ do not stick labels on the surface of the Authorised Service.
Page 8
IMPORTANT If copy protected CDs are used, IMPORTANT The CD player is able to read it may take a few seconds before the sys- most of the compression systems currently tem starts playing them. The CD player is on the market (e.g.: LAME, BLADE, XING, not guaranteed to play all copy-protected FRAUNHOFER) but as these systems are discs.
GENERAL RADIO SYSTEM Radio tuner specifications INFORMATION ❍ RDS; General specifications ❍ RDS - TMC/TMC Premium (Traffic Mes- ❍ Power: 4x25W; sage Channel); The Radionavigator consists of: ❍ Preset 5-band graphic equalizer; ❍ EON (Enhanced Other Network); ❍ radio system; ❍...
Page 10
AUDIO SYSTEM CD/MP3 CD PLAYER SD CARD READER The Radionavigator has a CD player capable The Radionavigator is equipped with an SD General specifications of reading Audio CDs and MP3 CDs. and SD-HC reader able to read/manage ❍ Bass/Treble; cards with SPI technology. CD specifications ❍...
Page 13
Some controls have various functions that depend on the system application activated at the time. Activation of the selected function is controlled, in some cases, by how long the button is pressed (short or long press) as described in the table below: Short button press Long button press...
Page 14
Short button press Long button press Button (more than 2 seconds) (less than 2 seconds) 7 – NAV Navigation Map displaying or, in Navigation Map mode, repetition of the last voice – message 8 – TRIP – Display TRIP data and Dynamic display screens Radio mode: increase frequency (FM or AM mode) MP3 CD/SD mode: select next folder –...
Page 15
Short button press Long button press Button (less than 2 seconds) (more than 2 seconds) 13 – MENU Main Menu Display Access to navigation simulation function 14 – OK Button press: open specific menu – Confirm selection Knob rotation: select menu items –...
STEERING WHEEL CONTROLS (for versions/markets where provided) fig. 3, fig. 4 The controls for the main Radionavigator functions are replicated on the steering wheel to make things easier. The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press), as described in the table below.
Page 17
Button Short button press Long button press (more than 2 seconds) (less than 2 seconds) & – Activates/deactivates Audio functions If Blue&Me is present Activates/deactivates Audio functions (see dedicated supplement) – & /ESC Increase volume Continuous increase in volume – Decrease volume Continuous decrease in volume Change active audio source...
MAIN FUNCTIONS SWITCHING THE SYSTEM Display angle adjustment ON/OFF Press the buttons to adjust the dis- The system is switched on by turning the ig- play angle. This adjustment is maintained The Radionavigator features four applications nition key to the MAR position and switch- at the next engine start-up.
MAIN MENU AUDIO TRAFFIC INFO (TMC/TMC Premium) Press the MENU button to display the Main This Menu makes it possible to change the menu fig. 5. audio source options (the only audio sources This displays traffic information received in that can be selected are those available for real time via the TMC/TMC Premium ser- Turn the OK button/knob to select the de- the system):...
DRIVING MODE CONFIGURATION AUDIO INFORMATION (DNA) After having activated this Menu, select the Press the MENU button to display the Audio Allows the display of the selected driving desired item by turning the OK button/knob menu (fig. 6). mode (“Dynamic”, “Normal” or “All Weath- and then press the knob to confirm.
This Menu makes it possible to adjust the VOLUME ADJUSTMENT MUTE/PAUSE FUNCTION audio settings for the radio, the CD, the Press the & button briefly to activate the To adjust the volume, turn knob 1 - fig.1. Media Player (if connected) and the audio The volume can be adjusted to a maximum Mute/Pause function.
“AUDIO ADJUSTMENTS” MENU If there is no HI-FI system in the car, the Treble/Bass possible adjustments are (fig. 7): (bass/treble adjustment) This Menu is displayed in the following ❍ Treble/Bass cases: Turn the OK button/knob to adjust the bass/treble. ❍ by pressing the ❍...
Volume-speed correction Graphic equalization AUDIO SOURCE SELECTION (speed dependent volume This function makes it possible to select one Alternatively, by pressing the MEDIA button adjustment) of the following equalizer curves: it is possible to select the CD source (only This function allows the volume level to if a CD is inserted) or Media Player (only if ❍...
RADIO FUNCTIONS RADIO STATION TUNING Selecting the radio station list Press the N/O/ / buttons on the front panel of the Radionavigator or the Two different lists of radio stations can be With the radio source activated, pressing the N/O buttons on the steering wheel to selected: one for the FM band and one for RADIO button repeatedly selects one of the search for a radio station.
FAVOURITE RADIO STATIONS Radio station manual AutoSTore function (automatic programming radio station programming) Up to 6 different radio stations can be stored for each frequency band (FM1, After having selected the desired frequency, The AutoSTore function is only available on FM2, FM , AM).
IMPORTANT NOTES TA FUNCTION PTY FUNCTION (traffic information) (programme type selection) – The AutoSTore function cannot be acti- vated with the PTY function active. Some stations on the FM band can transmit This function allows you to give priority to information about traffic conditions.
AF FUNCTION SPECIFIC RADIO MENU Insert frequency (alternative frequency search) With the radio function active it is possible By selecting this item it is possible to enter Alternative frequencies are used for auto- to access the Specific radio menu by press- the radio station frequency.
CD - MP3 CD/SD STOP/PAUSE CD-MP3 CD/SD SELECTING A TRACK FROM PLAYBACK THE LIST FUNCTIONS First of all press the h button to display Press button & to activate the function. the list of tracks (Audio CD) or the list of EJECT CD-MP3 CD/SD folders (MP3 CD) and then press the OK but- CD-MP3 CD/SD PLAYBACK...
CD - MP3 CD/SD SPECIFIC MENU Put shuffle on/off Programme tracks (random track playback) (with Audio CD only) With the Audio CD function activated it is possible to access the CD or MP3 CD/SD When this function is activated the music By selecting this item it is possible to pro- options menu by pressing the OK but- tracks on the CD are played in random or-...
MEDIA PLAYER MEDIA PLAYER MODE LAUNCH CONTROLS AVAILABLE Media Player mode is automatically brought By pressing the buttons you can se- FUNCTIONS up (with the AutoPlay function activated) by lect the next/previous track. By pressing the (only with Blue&Me N/O buttons you can select the next or connecting a USB memory stick containing music files to the USB port of the car or by previous folder/artist/music genre de-...
MEDIA PLAYER Put shuffle on/off Select mode SPECIFIC MENU See description in the “CD-MP3 CD/SD Selecting this item allows you to choose the With the Media Player source activated it Functions” paragraph. playback mode for the tracks on the USB is possible to access the specific Menu by device.
& & SPECIFIC AUX MENU IMPORTANT NOTES The functions of the device connected with With the AUX source activated it is possi- ble to access the specific Menu by pressing the AUX socket are directly managed by the device itself; it is not possible to change the OK button/knob.
The Navigator makes it possible to reach a IMPORTANT NOTES If the battery is replaced or disconnected desired destination through visual and or if the car is moved with the engine and The Navigation system provides assistance acoustic directions. The Navigation system the Radionavigator off (e.g.
MAP DISPLAY INFORMATION DURING Navigation information: the following NAVIGATION traffic information is provided during navi- With the Navigation system activated it is gation: possible to choose to display the map of the The following information always appears ❍ Icons on the map: the Radionavigator area with the following features: on the left side of the display during navi- gation:...
MAIN MENU NAVIGATION ENTERING DESTINATION A further choice can also be set from the fol- lowing options: The following information is displayed (fig. The destination can be entered in different ❍ Toll roads 16): ways: ❍ “Insert destination”; ❍ Destination address: consists of en- ❍...
Page 36
❍ List XX: the list of towns in a country is Insert address Destination address displayed (XX = number of the town). By selecting this item it is possible to enter “Country” selection If the complete postcode is entered, the the name of the Country, the town, the road corresponding city will be displayed.
Page 37
“Road” selection “Centre” selection POI (Points of Interest) After having selected the “Road” item, the If you want to get to a town centre, select This function makes it possible to access a display will show a keypad with numbers the item Centre.
When the choice has been made, the Ra- GPS coordinates Personal destinations dionavigator will display the list of main cat- This allows you to enter the coordinates This allows you to display the list of “Per- egories (fig. 21). (Longitude and Latitude) (fig. 22). sonal destinations”...
STOPS MANAGEMENT Show destination INSERT DIVERSION This makes it possible to change the route This allows you to display details of the des- This allows a detour to be inserted into the during navigation by inserting stop-overs. tination set. By selecting “Modify” you re- route set (fig.
MAP OPTIONS Map orientation Show POI (Points of Interest) This allows you to display the map using the This allows the map to be orientated ac- following items fig. 24: cording to the following parameters: This allows you to choose the categories of POI you want to be displayed on the map ❍...
Page 41
Hotels, restaurants, businesses Sports centres, attractions Map size – Hotels – Sports centres This allows you to change the map display mode. It is possible to choose between “Full – Restaurants – Golf courses screen map” (full screen map display) and –...
NAVIGATION OPTIONS Set up calculation criteria Voice message volume This allows you to change the following This allows you to select the following The voice instructions given by the system navigation parameters (fig. 27): navigation parameters: guide you to your destination recommend- ing all the manoeuvres to be carried out: the ❍...
❍ central zone(B): displays the navi- LAUNCH NAVIGATION Full screen map display gation map and the scale; After having selected and confirmed a des- The display fig. 29 is divided into 3 zones: ❍ upper zone (C): displays information tination, the display will show all the infor- ❍...
SPECIFIC NAVIGATION MENU Insert destination Traffic info (TMC/TMC Premium) You can access the specific menu from the See the description in the “Insert destina- Navigation application (by pressing the NAV tion” paragraph. See the description in the “Traffic info” chap- button).
TRAFFIC INFORMATION If the station selected does not broadcast TMC/TMC Premium settings (TMC/TMC Premium) traffic information, the display will show a Press the MENU button and select the cor- warning message and suggest the option of Some stations on the FM band (FM1, FM2 responding icon.
Page 46
Read messages Set up filters Geographic filter By selecting this item the display will show This allows you to filter traffic messages by The filters may be: the following categories: area and type of interest. One of the fol- ❍ “Around vehicle”: the system displays lowing items can be selected: Geographi- ❍...
Road information CHOOSE TMC/TMC Premium TMC/TMC Premium STATION RECEPTION STATUS One or more of the following categories can be selected: This allows you to select the TMC/TMC Pre- Press the MUSIC button to select the Mu- mium radio station manually or automati- sic Information screen.
ACTIVATING DRIVING MODE Automatic display of DNA Handling INFORMATION (DNA) setting ❍ “VDC mode”: display of active mode To activate the “Driving Mode Information When the DNA driving mode is changed, the (SPORT, SOFT or CONTROL) (DNA)” function, press the MENU button new DNA information appears briefly on the ❍...
“Dynamic” SCREENS When “Dynamic” mode is activated screen (only with “Dynamic” D1 is displayed by default. mode activated) ❍ Display screen “D1”: display of tur- These provide instantaneous information on bocharger pressure and power (as a per- vehicle status and are available in two dif- centage) (fig.
INFORMATION All the parameters are shown in the display TRIP COMPUTER by symbols (see fig. 38). SPECIFIC MENU The trip computer provides a series of in- formation relating to the route (e.g. time, If “Dynamic” mode is activated, two further With the trip computer function activated it options are displayed (see “Dynamic display distance, speed, fuel consumption).
& & TELEPHONE INFORMATION No phone call in progress Outgoing phone call DISPLAY The display will only show the mobile phone The display will show the name/number of To access the Telephone information, press logo, the name of the service provider and the person being called.
SPECIFIC TELEPHONE MENU Switch to mobile/ Put on hold/cancel hold switch to hands-free To access the specific Menu, press the TEL This item is only activated if there is a phone button and then press the OK button/knob. By activating this item the phone call in call in progress and makes it possible to de- The display will show the following options progress will be redirected from the car’s au-...
SPOT MESSAGES MENU Incoming calls Signalling of new incoming (only with privacy function messages The display will show the following infor- deactivated) mation: The display will show the following infor- There are four different types of spot mes- mation: ❍ name/number of the caller; sages that appear on the display when a sit- ❍...
To access the Configurations menu DISPLAY Display brightness (fig. 40) select the “Configurations” item This allows you to make the following se- One of the following modes can be selected: from the main Menu. lections (fig. 41): ❍ “Day”: adapts the brightness of the dis- After having activated the Configuration ❍...
Measures SOUNDS “Warnings volume” (temperature/distance/ (Adjustment of instrument This allows you to adjust the volume of the consumption) panel buzzer volume) voice messages, the instrument panel Select the item “Measures” by turning the buzzer and the buttons buzzer in the car Adjustment of the volume for signals for any OK button/knob and then press the knob (fig.
MY CAR OPTIONS Maintenance info Speed warning This allows a series of parameters and op- This provides information relating to the next By selecting this item it is possible to set erating modes to be set for the car (fig. 44). Service expressed as mileage remaining the car’s speed limit (fig.
Page 57
Show info on dashboard Daytime running lights (DRL) fig. 46 (for versions/markets Select this item to independently open the where provided) driver’s door and/or the boot: By selecting this item it is possible to set the repetition of the information relating to the By selecting this item it is possible to acti- –...
DATE & TIME LANGUAGE MEDIA AND MAPS - SD CARD This allows the date and the time to be This allows you to change the language of The system uses the SD Card support con- changed (fig. 47). the messages shown on the display and the taining the navigation maps.
Page 59
Safe removal of the SD Card Code to enable maps Map licence status fig. 48 Select the “Code to enable maps” item: the The Radionavigator manages a map pro- To remove the SD Card, proceed as follows: display will show a screen with the Radion- tection system: when the system recognis- avigator serial number.
The Radionavigator is capable of detecting OPERATING FAULTS PROBLEMS DUE TO and solving both operating faults within the OVERHEATING If an internal fault is detected, the system system and overheating problems. “freezes” the last screen available and If the temperature of a Radionavigator hard- launches a diagnostic search.
Page 61
CUSTOMER SERVICES TECHNICAL SERVICES - SERVICE ENGINEERING Largo Senatore G. Agnelli, 5 -10040 Volvera - Torino (Italia) Fiat Group Automobiles S.p.A. Print no. 604.38.364 – 1 Edition – 09/2010 Copyright. Reproduction, even partial, without written authorisation from Fiat Group Automobiles S.p.A. is prohibited. S E R V I C E...