Checking And Restoring Tyre Pressure - Alfa Romeo GIULIETTA Owner's Handbook Manual

152
153
154
155
A0K0518
❒ inflate the tyre to the pressure
indicated in the "Wheels" paragraph
in the "Technical data" chapter. In
order to obtain a more precise
reading, check the pressure value on
pressure gauge B fig. 153 with the
compressor off;
❒ if after five minutes it is still impossible
to reach at least 1.8 bar, disengage
A0K0519
the compressor from the valve and
power socket, then move the car
forwards by approx. ten metres
in order to distribute the sealing fluid
inside the tyre evenly, then repeat
the inflation operation;
❒ if you still cannot obtain a pressure of
at least 1.8 bar within 5 minutes from
the compressor switching on, do
not drive off and contact an Alfa
A0K0520
Romeo Dealership;
❒ after having driven for about 10
minutes, stop and recheck the tyre
pressure; remember to engage
the handbrake;
❒ if a pressure value of at least 1.8 bar
is detected, restore the correct
pressure (with the engine running and
the handbrake engaged), resume
driving and drive with great care to an
A0K0128
Alfa Romeo Dealership.
CHECKING AND
RESTORING TYRE
PRESSURE
The compressor can also be used to
check and, if necessary, adjust the tyre
pressure.
Release quick coupling A fig. 157 and
connect it directly to the valve of the
tyre to be inflated.
156 A0K0521
171