Removing The Subwoofer - Alfa Romeo GIULIETTA Owner's Handbook Manual

❒ operate the device A fig. 142 so as to
extend the jack, until the upper part
B fig. 143 is inserted correctly inside
the side member C;
142
143
❒ alert any bystander that the car is
about to be raised; all persons
should be kept away from the car
and nobody must touch it until it has
been lowered;
166
❒ fit handle D into the housing in device
A, operate the jack and raise the car
until the wheel is a few centimetres
from the ground;
❒ for versions with wheel cap, remove
the wheel cap after loosening the 4
fastening bolts and finally loosen
the fifth bolt and extract the wheel;
❒ make sure the contact surfaces
between space-saver wheel and hub
are clean so that the fastening bolts
will not come loose;
❒ fit the space-saver wheel by inserting
the first bolt for two threads into the
A0K0651
hole closest to the valve;
❒ take the wrench A fig. 140 and fully
tighten the fixing bolts;
❒ operate the jack handle D to lower
the car. Then extract the jack;
❒ use the wrench A provided to fully
tighten the bolts in a criss-cross
fashion as per the numerical
sequence illustrated in fig. 144;
A0K0652
❒ when replacing an alloy wheel it is
advisable to place it upside down,
with the aesthetic part facing
upwards.
144
Restore the standard wheel as soon as
possible, because, once placed in the
associated compartment, the luggage
compartment load platform is rendered
uneven as the standard wheel is larger
than the spare wheel.
26)
REMOVING THE
SUBWOOFER (versions
with Bose HI-FI system)
(for versions/markets, where provided)
IMPORTANT The following procedure
only applies to cars equipped with
Bose HI-FI systems with subwoofer (for
versions/markets, where provided).
A0K0040