Replacing The Bottle - Alfa Romeo GIULIETTA Owner's Handbook Manual

Hide thumbs Also See for GIULIETTA:
Table of Contents

Advertisement

REPLACING THE BOTTLE

Proceed as follows:
❒ release coupling A fig. 157 and
disconnect tube B;
❒ turn the bottle to be replaced
anticlockwise and raise it;
157
❒ fit the new bottle and turn it
clockwise;
❒ insert coupling A and tube B in
position.
172
IMPORTANT
27) In the event of a puncture
caused by foreign bodies, the kit
may be used to repair tyres
showing damages on the tread or
shoulder up to max. 4 mm
diameter.
A0K0041
IMPORTANT
2) Dispose of the bottle and the
sealant properly. Dispose of the
components in compliance with
national and local regulations.
WARNING
118) Give the booklet to the
technicians who will be handling
the tyre that was treated using
the "Fix&Go Automatic" kit.
119) Punctures on the sides of the
tyre may not be repaired. Do not
use the kit if the tyre is damaged
due to travelling when flat.
120) Wear the protective gloves
provided with the kit.
121) Apply the adhesive label where
it can be easily seen by the driver
as a reminder that the tyre has
been treated with the quick repair
kit. Drive carefully, particularly
on bends. Do not exceed 80 km/h.
Do not accelerate or brake
suddenly.
122) If the pressure has fallen below
1.8 bar, do not drive any further:
the Fix&Go Automatic kit cannot
guarantee proper hold because
the tyre is too damaged. Contact
Alfa Romeo Authorised Services.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents