Table of Contents
Advertisement
2. Briefly push the SET/BACK button to go back to the
menu screen or hold the button down to go back to the
standard screen.
NOTE:
The "Scheduled Servicing Plan" includes vehicle mainte-
nance at fixed intervals, refer to "Scheduled Servicing" in
"Servicing And Maintenance" for further information. This
message is displayed automatically along with the warning
light when the key is turned to MAR/ON/RUN - 1,242 miles
(2,000 km) before these deadlines and reappears every
124 miles (200 km). Below 124 miles (200 km) servicing indi-
cations are more frequent. The indication will appear in
miles or kilometers according to the "Unit Of Measurement"
settings. When the next scheduled service is approaching
and the key is turned to MAR/ON/RUN, the word Service
will appear on the display, followed by the number of miles
or kilometers left. Contact an authorized dealer. The opera-
tions in the "Scheduled Servicing Plan" will be performed
and the message will be reset.
Daytime Running Lamps
This function may be used to activate/deactivate the
daytime running lamps.
Proceed as follows to switch this function on or off:
1. Briefly push the SET/BACK button to display the three
submenus.
2. Briefly push the SET/BACK button. "On" or "Off" will
flash on the display (according to previous setting).
GETTING TO KNOW YOUR INSTRUMENT PANEL
3. Push and release the up or down arrow button for setting.
4. Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the button (approximately
one second) to go back to the main screen without storing
the settings.
Exit Menu
This function closes the initial menu screen.
Briefly push the SET/BACK button to go back to the main
screen.
Push and release the up arrow button to return to the first
menu option (Speed Buzzer).
Push and release the down arrow button to return to the last
menu option (Daylights).
Values Displayed
Indications On Display
Each time a value is selected, the following information is
shown in the instrument cluster display:
• "Trip A" or "Trip B" location(s)
• Name, value and unit of measure of the selected value (e.g.
"Range 520 mi").
57
3
Advertisement
Table of Contents
