2. Place the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a Small cross head or Flat end
screwdriver.
2.3
Owner Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event
of a power failure, or when moving to a different room.
1. Connect the small plug of the power adapter to the owner unit and
the other end to the electrical outlet. Only use the enclosed power
adapter (6V DC/500mA) with the slightly smaller DC plug.
2. Press and hold the
turn ON the owner unit.
3. Once the pet and owner units are switched on, the display on the
owner unit will show the video captured by the pet unit.
Getting Started
Small cross head or
Flat end screw driver.
P
POWER ON/OFF button for 1 second to
9