Getting Started; Pet Unit Power Supply; Owner Unit Battery Installation - Motorola SCOUT500 User Manual

2. Getting Started

2.1

Pet Unit Power Supply

1. Connect the small plug of the power adapter to the pet unit (camera)
and the other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (6V DC / 500mA) with the slightly
larger DC plug.
2. Slide the ON/OFF switch to the ON position. The power LED will
light up in orange.
3. Slide the ON/OFF switch to the OFF position to turn the Pet Unit off.
2.2

Owner Unit Battery Installation

The supplied rechargeable battery pack should be fitted so the owner unit
can be moved without losing the link with the camera. Charge the battery
in owner unit before first time use or when the owner unit indicates the
battery is low.
Black
1. Insert the plug of the rechargeable battery pack into the small socket
inside the battery compartment as shown above and fit the battery
pack into the compartment.
8
Red
Getting Started