Motorola SCOUT500 Quick Start Manual

Model: SCOUT500, SCOUT500/2, SCOUT500/3, SCOUT500/4 - Quick Start Guide
For a full explanation of all features and instructions, please refer to the User's Guide.
1 Setting up your digital pet monitor
Connecting power supply for the Pet unit
A
Fastening the cover for the Owner unit
C
WARNING:
STRANGULATION HAZARD - In case this unit is being to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and out of their reach.
Never place camera or cords within a crib or near a bed. Secure the cord away from children's reach. Never use extension cords with AC Adapters. Only use the AC Adapters
provided.
As with any electrical device, supervision of your pet's usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing, we strongly
recommend you keep this and all other electrical devices out of its reach.
• Connect the small plug of
the power adapter to the
pet unit and the other
end to the electrical
outlet.
• Only use the enclosed
adapter (6V DC / 500mA).
Small cross head or Flat
end screw driver.
Installing the battery pack for the Owner unit
B
Black
Red
Connecting power supply for the Owner unit
D
• Insert the wire tab of the
rechargeable battery
pack into the contact
slot as shown above
and fit the battery pack
into the compartment.
• Connect the small plug
of the power adapter to
the owner unit and the
other end to the
electrical outlet.
• Only use the enclosed
adapter (6V DC /
500mA).