Table of Contents
Advertisement
2.4
Registration (Pairing)
The Pet monitor camera is pre-registered to your Owner Unit. You do not
need to register it again unless the Pet Unit loses its link with the Owner
Unit.
To re-register your Pet Unit, or register a new Pet Unit, follow the
procedure below:
1. Press the
button to select the ADD CAMERA icon
button to confirm.
1
2
3
4
2.
/
/
/
will pop up, press the
select the desired Camera identification number and press the
button to start searching for a camera unit. The Green Audio Level
LED turns on while searching.
3. Press and hold the PAIR button under the bottom left edge of the
camera unit until the owner unit finds the camera, beeps and the
video from the camera appears.
NOTE
If a particular Pet Unit was registered previously, registering this current
Pet Unit again will overwrite the old registration.
If no camera unit is found within about 30 seconds, the search will end
and the owner unit will return to its previous mode.
Getting Started
button of the owner unit and then press the
button to start.
, and press the
+
UP button or
-
DOWN
-
DOWN button to
11
Hide quick links:
Advertisement
Table of Contents
