Table of Contents
Advertisement
2. If the owner unit is turned ON, when the adapter is plugged in, the battery
icon in the screen's top right corner will show that the battery is charging
by cycling the internal segments, The Blue LED in the top left corner lights
up to indicate the adapter is plugged in.
2.4
Registration (Pairing)
The Pet monitor is pre-registered to your Owner Unit. You do not need to
register it again unless the Pet Unit loses its link with the Owner Unit. To re-
register your Pet Unit, or register a new Pet Unit, follow the procedure below:
M
1. Press the
Menu button of the owner unit and the menu bar will pop up.
<
2. Press the
LEFT button or
the
/
/
+
3. Press the
UP button or
button to confirm.
4.
1 /
2 /
button to select the desired CAM and press the OK button to start
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the PAIR button underneath the pet unit until the owner unit
finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Pet Unit was registered previously, registering this current Pet Unit
again will overwrite the old registration.
10
>
RIGHT button until
/
menu will pop up.
-
DOWN button to select
3 /
4 will pop up, press the
is highlighted, and
, and press the OK
+
-
UP button or
Getting Started
DOWN
Advertisement
Table of Contents
