Setup
1. When the SETUP menu screen is displayed, select 'SSDR' by using the
Function Setup switch so that the arrow indicates 'SSDR'.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP
menu.
EXIT
Select a desired EXIT mode using the Function Setup switch depending on the camera purpose.
sAVe : Save the current settings and exit the MAIN SETUP menu.
NOT sAVe : Do not save the current settings and exit the MAIN SETUP menu.
ReseT: Resets the camera settings to the factory defaults. Monitor, Language
and COAX settings are not initialized.
26_ Setup
SSDR ON
SSDR OFF