Samsung SCD-2022R User Manual page 22

High resolution ir dome camera
Table of Contents

Advertisement

Setup
You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
When adjusting the noise reduction level of the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced but that after image may also occur.
DAY/ NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up
and Down buttons so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Left and Right buttons according to the picture display
you want.
 AUTO : The mode is switched to 'Color' in a normal environment, but switches to
-
BURST MODE :
burst signal on B/W mode.
-
DURATION :
level at which the camera switches from day
to night mode.
-
DWELL TIME :
time about changing the day/night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
 exTeRN
 COlOR : The picture is always displayed in color.
: The picture is always displayed in black
 b/W
and white.
-
BURST MODE :
the burst signal on B/W mode.
-
IR MODE (HIGH/ LOW/ USER) :
When IR LED is turned on in B/W, the
objects can be clearly identified due to the
function that decreases screen saturation
of objects within a short distance.
TOP/BOTTOM/LEFT/RIGHT :
After selecting USER, you can adjust the
range according to the location of objects.
When AGC in the EXPOSURE menu is 'OFF', AUTO mode is not available to select.
22_ Setup
'B/W' mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup switch. You can turn on or off
the burst signal on B/W mode.
You can turn on or off the
You can select the brightness
You can select the duration
: Ground to the grounding terminal to allow automatic switching between COLOR
and B/W(Black/White).
You can turn on or off
AUTO SETUP
▶1.BURST MODE
2.COLORB/W
DURATION
DWELL TIME
3.B/WCOLOR
DURATION
DWELL TIME
4.RETURN
BW MODE SETUP
1.BURST MODE
2.IR MODE
3.RETURN
IR MODE SETUP
1.
IR MODE
Press SET to Return
ON
FAST
5 SEC
FAST
10 SEC
ON
HIGH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd-2042r

Table of Contents