Table of Contents
Advertisement
Installation
BEFORE INSTALLATION
Before installing your camera, you have to read the following cautions ：
• You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
• Don't let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or fire.
• Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
• When installing your camera, don't allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
INSTALLATION
1.
Separate the dome cover by turning anti-clockwise and separate the shield case by pulling from
the camera body.
Latch
T he installation should be done by qualified
service personnel or system installers.
If the ceiling material is not strong enough to
hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.
To change the position of the cable, take
away the Hole Cover and pass the cable
through.
12_ Installation
Unlocking direction
(Anti-clockwise)
Main Body
(Camera)
Locking direction
(Clockwise)
Dome cover
Original position of
the cable
Hole
Cover
Advertisement
Table of Contents
