Table of Contents
Advertisement
Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of
2.
the camera by rotating it anti-clockwise.
Place the separated ceiling bracket so that the "Front" side faces the area to be monitored
3.
and install it with the tapping screws.
Ceiling bracket
tapping screw
To combine the main body with the ceiling bracket, make sure that the pan base fixation screw
4.
face the opposite side of the "Front" side of the ceiling bracket and rotate it clockwise.
Adjust the camera lens to face the area to be monitored and fix the main body and
5.
the dome cover by aligning the grooves and rotating the body clockwise.
tapping
screw
If
you
want
to
install
bracket combined, fix it using two tapping screws
at the side of the main body
Pan Base
fixation screw
the
camera
with
the
ceiling
English_13
Advertisement
Table of Contents
