Safety Instructions - Hilti SF 144-A Operating Instructions Manual

Vibration information for the SFH 144-A in accordance with EN 60745
Triaxial vibration values (vibration vector sum)
Hammer drilling in concrete, a
Uncertainty (K) for triaxial vibration measurements
Vibration information for the SFH 144-A and SF 144-A in accordance with EN 60745
Triaxial vibration values (vibration vector sum)
en
Drilling in metal, a
Uncertainty (K) for triaxial vibration measurements
Vibration information for the SFH 144-A and SF 144-A in accordance with EN 60745
Triaxial vibration values (vibration vector sum)
Screwdriving without impact action, a
Uncertainty (K)
Battery
Rated voltage
Capacity
Energy content
Weight
Temperature monitoring
Type of cell
No. of cells

5 Safety instructions

NOTE
The safety rules in section 5.1 contain all general safety
rules for electric tools which, in accordance with the
applicable standards, must be listed in the operating
instructions. Accordingly, some of the rules listed may
not be relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
18
h,ID
h,D
h
measured in accordance with EN 60745‑2‑1
12.0 m/s²
1.5 m/s²
measured in accordance with EN 60745‑2‑1
< 2.5 m/s²
1.5 m/s²
measured in accordance with EN 60745‑2‑2
< 2.5 m/s²
1.5 m/s²
B 144/2.6 Li‑Ion
14.4 V
2.6 Ah
37.44 Wh
0.55 kg
Yes
Li‑Ion
4
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any ad-
apter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of