Changing The Lamp - Fujitsu LPF-4800 User Manual

Changing the Lamp

• When the lamp reaches the end of its service life, the image becomes dark and the colors lose their vividness. When this
happens, change the lamp unit.
• When the "Approaching Recommended Lamp Life!" message appears, change the lamp unit.
• After removing the old lamp unit, handle with care to avoid breakage. Dispose of as industrial waste.
• Be sure to initialize the lamp timer after changing the lamp unit.
WARNING
• Do not remove any screws other than those specified (
The high voltage and high temperature inside the projector may lead to electric shock or burns if touched.
• When changing the lamp unit, be sure to replace with a new lamp unit. Use of a used or second-hand lamp unit may lead
to breakage or failure of the lamp.
Changing the Lamp
Allow the lamp to cool for more than 1 hour after switching off the power before changing.
1
Press the POWER button and
remove the power connector
from the power terminal.
Remove power connector
En-30
mark).
2
Remove the 1 screw (
and remove the lamp cover
from the projector.
For safety reasons, the safety devices are enabled
when changing the lamp to shut off the power.
mark)