Fujitsu LPF-4800 User Manual page 15

Adjustment
• Adjust the height of the projector using the 2 adjusters on the front.
• If the relation between the position of the projector and the screen is not correct, the image will be distorted and blurred.
1
Lift the front of the projector, then press the
two adjuster buttons on the sides of the
projector.
The adjuster legs will loosen and extend.
2
Release the adjuster buttons to fix the adjusters.
3
Turn the adjusters for fine adjustment.
Note
• If you wish to lower the projector to its original position before storing it, press the adjuster buttons and slowly
lower the projector. It can then be stored easily.
Warning
• Place at least 30 cm (12 inches) away from the wall. Do not set up where ventilation is poor as this may lead to
fire.
• Do not place on a carpet or blanket as this may lead to fire.
• Do not block the ventilation holes on the front, right side and left side of the projector, as this may lead to fire.
Adjuster button
Adjuster
Down
Up
En-15