Operating The Menu Screens - Fujitsu LPF-4800 User Manual

Operating the Menu Screens

Adjustment buttons ( ,
Operating the Menu Screens
1
Press the MENU button.
The Menu screen is displayed.
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
: Select ENTER : Next
Example: When RGB is selected for the input
source
Note
• The operation bar is displayed at the bottom of
the screen.
2
Select the menu item you wish
to adjust with the adjustment
buttons ( ,
control unit or projector.
The selected menu screen is displayed.
The menu screen switches as shown below each
time the buttons are pressed.
IMAGE (En-24)
INSTALLATION (En-28)
En-22
POWER
, , )
ZOOM-PAN
Normal Low
0
0
Operation bar
) on the remote
POSITION (En-26)
DISPLAY (En-27)
AUTO MUTE
MODE
ENTER button
ENTER
MENU button
MENU
STATUS
VOLUME KEYSTONE
CANCEL
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
: Select ENTER : Next
Example: Select the IMAGE menu.
3
Press the ENTER button.
The screen for selecting the item you wish to
adjust is displayed.
Note
• The same operation can be performed by
pressing the
4
Select the item you wish to
adjust with the adjustment
buttons ( ,
The green button on the left of the selected item
lights up.
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
: Select : Set up
Example : Select Brightness.
Normal Low
0
0
adjustment button.
).
Normal Low
0
0