Lincoln Electric SVM189-B Service Manual page 33

C-9
SPOOL GUN / WIRE DRIVE
SELECTOR SWITCH INSTALLATION
1. Install the M21182 electrical adapter harness that
came with the spool gun per the following instruc-
tions.
WARNING
ELECTRIC SHOCK CAN KILL.
2. Disconnect input power from the machine.
------------------------------------------------------------------------
OPEN THE MACHINE
3. Remove two 5/16" hex hinge screws from door.
4. Remove ten 5/16" hex screws from cover.
ACCESSORIES
5. Remove screws from cover.
(A) is the location of two 3/4" long screws.
6. Remove cover.
B
7. If machine has a plastic handle (A), then remove
screw (B).
COMPACT WIRE WELDERS
A
A
C-9