Media Placement - Heatilator CD4236-MOD Installation Manual

Figure 11.3 Install Side Glass Panels
SIDE RETAINERS
Figure 11.4 Install Side Retainers
Heatilator • CD4236-MOD, CD4842-MOD Installation Manual • 2241-901 Rev. C • 6/15
F. Media Placement
WARNING! Risk of Explosion! Follow media placement
instructions. Improperly placed media interfere with proper
burner operation.Fireplace will not function properly.
Delayed ignition may occur.
WARNING! Choking Hazard! Keep media out of reach
of children.
• DO NOT place media in pilot opening.
• DO NOT place media in a position that it may fall into
the pilot opening.
• DO NOT use any media other than the media supplied
with this fi replace or listed in Service Parts Section in
this manual.
• DO NOT use more than 14 lb. of media per CD4842-
MOD or 12 lb. per CD4236-MOD fi replace. Note: One
bag of glass contains 7 lbs.
CD4236-MOD: Extra 2 lbs. may be saved for future use.
1. Place media evenly on the base pan. Figure 11.10
shows properly placed media.
2. The media can only be placed in the shaded areas as
shown in Figure 11.8 and Figure 11.9.
3. Do not apply media over the pilot opening. See Figure
11.8 and Figure 11.9.
4. The rock fi xture assembly is factory installed in the
appliance. See Figure 11.5 and Figure 11.6.
5. After the media is properly installed, carefully remove
the rock fi xture assembly. Do not allow any media to
fall into the opening. See Figure 11.7.
fi xture assembly under the appliance for future use.
Figure 11.5 Rock Fixture Installed
Store the rock
41