Table of Contents
Advertisement
632
9-1. Specifications
Tire related term
CT
Extra load tire
Groove
Innerliner
Innerliner separation
Intended outboard sidewall
Light truck (LT) tire
Load rating
Maximum load rating
Maximum permissible infla-
tion pressure
Measuring rim
Open splice
Outer diameter
RC350/RCF_U (OM24636U)
Meaning
A pneumatic tire with an inverted flange tire and rim
system in which the rim is designed with rim flanges
pointed radially inward and the tire is designed to fit on
the underside of the rim in a manner that encloses the
rim flanges inside the air cavity of the tire
A tire designed to operate at higher loads and at higher
inflation pressures than the corresponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a tubeless tire
that contains the inflating medium within the tire
The parting of the innerliner from cord material in the
carcass
(a) The sidewall that contains a whitewall, bears white
lettering, or bears manufacturer, brand, and/or
model name molding that is higher or deeper than
the same molding on the other sidewall of the tire,
or
(b) The outward facing sidewall of an asymmetrical tire
that has a particular side that must always face out-
ward when mounted on a vehicle
A tire designated by its manufacturer as primarily
intended for use on lightweight trucks or multipurpose
passenger vehicles
The maximum load that a tire is rated to carry for a given
inflation pressure
The load rating for a tire at the maximum permissible
inflation pressure for that tire
The maximum cold inflation pressure to which a tire may
be inflated
The rim on which a tire is fitted for physical dimension
requirements
Any parting at any junction of tread, sidewall, or inner-
liner that extends to cord material
The overall diameter of an inflated new tire
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
Troubleshooting
