Lexus RC F 2015 Owner's Manual page 442

Hide thumbs Also See for RC F 2015:

Table of Contents

6-4. Using the other interior features

If the garage door or other device does not operate, proceed to "Pro-

gramming a rolling code system".

Repeat the steps above to program another device for any of the remaining

Programming a rolling code system

Locate the "Learn" or "Smart"

button on the garage door

opener motor in the garage.

This button can usually be found

where the hanging antenna wire is

attached to the unit. The name and

color of the button may vary by man-

ufacturer. Refer to the owner' s man-

ual supplied with the garage door

opener motor for details.

Press and release the "Learn" or

"Smart" button.

after performing

Press and hold the desired

vehicle) for 2 seconds and

release it. Repeat this sequence

(press/hold/release) up to 3

times to complete programming.

If the garage door opener motor

operates when the HomeLink

ton is pressed, the garage door

RC350/RCF_U (OM24636U)

within 30 seconds

button (inside the

I n f o r ma t i o n P r o v i d e d b y :

Troubleshooting