3-2. Opening, closing and locking the doors and trunk
Side window open/close function linked to door operation
■
When a door is opened, its window opens slightly. When a door is closed, its window
closes completely.
Switching the door unlock function
■
It is possible to set which doors the entry function unlocks using the wireless remote con-
trol.
Turn the engine switch off.
1
When the indicator light on the key surface is not on, press and hold
2
for approximately 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds, and
repeat step
.)
2
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been changed. (If
a door is not opened within 60 seconds after
again and the alarm will automatically be set.)
In a case that the alarm is triggered, immediately stop the alarm. (P. 78)
Impact detection door lock release system
■
In the event that the vehicle is subject to a strong impact, both side doors are unlocked.
Depending on the force of the impact or the type of accident, however, the system may
not operate.
Using the mechanical key
■
The doors can also be unlocked with the mechanical key. (P. 590)
Conditions affecting the operation of the smart access system with push-button start
■
or wireless remote control
P. 148
Customization
■
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 635)
RC350/RCF_U (OM24636U)
Unlocking function
Holding the driver' s door handle
unlocks only the driver' s door.
Holding the passenger' s door
handle unlocks both side doors.
Holding either door handle
unlocks both side doors.
is pressed, the doors will be locked
I n f o r ma t i o n P r o v i d e d b y :
139
,
or
.
Beep
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
3