Lexus RC F 2015 Owner's Manual page 274

274
4-5. Using the driving support systems
Things you should know
If you notice any symptoms
■
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by
your Lexus dealer.
Likely cause
 The image is difficult to see
• The vehicle is in a dark area
• The temperature around the lens is
either high or low
• The outside temperature is low
• There are water droplets on the cam-
era
• It is raining or humid
• Foreign matter (mud etc.) is adhering to
the camera
• There are scratches on the camera
• Sunlight or headlights are shining
directly into the camera
• The vehicle is under fluorescent lights,
sodium lights, mercury lights etc.
 The image is blurry
Dirt or foreign matter (such as water
droplets, snow, mud etc.) is adhering to
the camera.
 The image is out of alignment
The camera or surrounding area has
received a strong impact.
 The guide lines are very far out of alignment
The camera position is out of alignment.
• The vehicle is tilted (there is a heavy
load on the vehicle, tire pressure is low
due to a tire puncture, etc.)
• The vehicle is used on an incline.
RC350/RCF_U (OM24636U)
Solution
If this happens due to these causes, it
does not indicate a malfunction.
Back up while visually checking the vehi-
cle' s surroundings. (Use the monitor
again once conditions have been
improved.)
The image on the Lexus parking assist
monitor system screen can be adjusted.
(P. 337)
Rinse the camera lens with water and
wipe it clean with a soft cloth.
Wash with a mild soap if the dirt is stub-
born.
Have the vehicle inspected by your Lexus
dealer.
Have the vehicle inspected by your Lexus
dealer.
If this happens due to these causes, it
does not indicate a malfunction.
Back up while visually checking the vehi-
cle' s surroundings.
I n f o r ma t i o n P r o v i d e d b y :