Webcam Assembly - HP ENVY Notebook Maintenance And Service Manual

Webcam assembly

Description
Webcam assembly
Webcamera/microphone cable
Before removing the webcam assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the display panel (see
6. Remove the service cover (see
7. Remove the hard drive (see
8. Remove the memory modules (see
9. Remove the WLAN module (see
10. Remove the optical drive (see
11. Remove the base enclosure (see
12. Remove the top cover (see
Remove the webcam assembly:
▲ Remove the webcam (1), and then disconnect the webcam/microphone cable (2).
Reverse this procedure to install the webcam.
Battery on page 33.
Display panel on page
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
Optical drive on page
Base enclosure on page
Display hinges and top cover on page
45).
34).
34).
37).
38).
41).
50).
58).
Component replacement procedures
Spare part numbers
720273-001
720229-001
61