HP ENVY Notebook Maintenance And Service Manual page 45

Before removing the primary hard drive or secondary hard drive (select models only), follow these
steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the primary hard drive:
1. Disconnect the hard drive cable from the system board (1), and then remove it (2).
2. Use the tab to remove the hard drive from the hard drive bay (3).
Remove the secondary hard drive (select models only):
1. Disconnect the hard drive cable from the system board (1), and then remove it (2).
Battery on page 33).
Service cover on page 34).
Component replacement procedures 35