Memory Modules - HP ENVY Notebook Maintenance And Service Manual

Memory modules

Description
2-GB (PC3L, 12800, 1600-MHz)
4-GB memory module (PC3L, 12800, 1600-MHz)
8-GB memory module (PC3L, 12800, 1600-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the
memory module. (The memory module tilts up.)
CAUTION:
the components on the memory module.
2. Slide the memory module forward (2) to remove it.
Reverse this procedure to install a memory module.
Battery on page
Service cover on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
33).
34).
Component replacement procedures
Spare part number
691739-001
691740-001
693374-001
37